Horizontal vulcanization channel - hot air
The hot air vulcanization drying passage adopts the advanced technology of two-stage vulcanization. After the silicone rubber products are extruded by the extruder, they are suspended through the front drying path to achieve pre-vulcanization and rapid styling, and then fully vulcanized through the back drying path to ensure the roundness of the extruded vulcanized silicone tube and silicone strip without any deformation; There is no indentation on the surface of the product; Moreover, the temperature control precision is high, the production efficiency is high, the operation is simple
Horizontal vulcanization channel - hot air
The hot air vulcanization drying passage adopts the advanced technology of two-stage vulcanization. After the silicone rubber products are extruded by the extruder, they are suspended through the front drying path to achieve pre-vulcanization and rapid styling, and then fully vulcanized through the back drying path to ensure the roundness of the extruded vulcanized silicone tube and silicone strip without any deformation; There is no indentation on the surface of the product; Moreover, the temperature control precision is high, the production efficiency is high, the operation is simple
·Technical characteristics
·Special infrared radiation heating tube is adopted, which has high temperature and radiation interaction, short vulcanization time and high thermal efficiency. There are 9 heating tubes in the front baking channel, which are controlled in two groups. There are 24 heating pipes in the after-baking channel, which are divided into two groups of 16 and 8, which can be controlled according to the choice of strong or weak gear, flexible operation, economic and energy saving
·With the combination of temperature control instrument and thermocouple, the process temperature can be arbitrarily set and adjusted according to the need, and the operation is simple and fast
·When the drying channel reaches the set process temperature, it will automatically change to constant temperature control, and at this time, a set of heaters will be automatically turned off to save energy
·Stainless steel (Teflon) conveyor belts with gravity tension rollers ensure that the conveyor belt is always in a constant state of transmission during production
·Vulcanized baking channel is covered with stainless steel plate, clean and beautiful, without any pollution to the products
·The drying road adopts the open-type structure, which is very convenient for repair, maintenance and cleaning
·High production efficiency, for the traditional silicone rubber extrusion vulcanization process 3-4 times
|
Operating temperature of the
front baking passage
|
50－800°C |
Operating temperature of the
back drying passage
|
50－450°C |
| Front dryer heating power | 9-12kW | Heating power of rear drying passage | 12-30kW |
| Band width | 140mm Stainless steel strip | Towing motor power | 0.75-2.2kW |
| Productive capacity | The front and back vulcanizing and drying channels are shared | 850-3000m/h | |
| After curing baking channel alone use | 600—3000m/h | ||
| Overall dimensions (length, width and height) | 4500-10500×500×1140mm | Electronic control cabinet dimensions (length, width and height) | 700×400×1200mm |
